J1 3D Printing Modes Comparison
| Max Speed (mm/s) | 300 | 250 | 200 | 160 | 350 |
| Layer Height (mm) | 0.12 | 0.16 | 0.2 | 0.24 | 0.1 |
Printing Properties
| Technology | Fused Filament Fabrication (FFF) |
| Extruder System | Independent Dual Extruders (IDEX) |
| Printing Modes | 1. Default Mode 2. Backup Mode 3. Copy Mode 4. Mirror Mode |
|
Build Volume (W × D × H) |
Default Mode & Backup Mode: 300 mm × 200 mm × 200 mm |
| Copy Mode: 160 mm × 200 mm × 200 mm | |
| Mirror Mode: 150 mm × 200 mm × 200 mm | |
|
Layer Height (with 0.4 mm nozzle) |
0.05 mm–0.3 mm |
| Build Plate | PEI glass plate |
| Max. Heated Bed Temperature | 100℃ |
| Nozzle Diameter | 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm, Hardened (sold separately) |
| Max. Nozzle Temperature | 300℃ |
| Filament Diameter | 1.75 mm |
| Supported Materials[1] | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF |
| Data Transmission Methods | Wi-Fi, USB cable, USB flash drive |
| Operating Noise | < 50 dBA |
Machine Properties
| Dimensions | 539 mm × 401 mm × 464 mm |
| Weight | 25 kg |
| Touchscreen | Size: 5 in. OS: Android Resolution: 1280 × 720 pixels |
| Memory | 1 GB RAM, 8 GB eMMC |
| Repeatability of Linear Rails[2] | ± 0.03 mm (X/Y) ± 0.02 mm (Z) |
| Expected Lifespan of Linear Rails[3] | Over 10 Years |
Operating Conditions
| Operating Environment | Temperature: 10ºC–35ºC Relative Humidity: 10%–90% (non-condensing) |
| Storage Environment | Temperature: -20℃–55℃ Relative Humidity: 10%–90% (non-condensing) |
Power
| Input | Rated Voltage: AC 100 V–240 V, 50 Hz/60 Hz Rated Current: 4.4 A Max. |
| Output | DC 24 V, 400 W Max. |
Wi-Fi
| Protocol | 802.11a/b/g/n20/n40 |
| Frequency Range | 2.400 GHz–2.482 GHz 5.150 GHz–5.250 GHz 5.725 GHz–5.850 GHz |
| Transmitter Power (EIRP) | 2.4 GHz: < 17.05 dBm (USA & Canada), < 17.24 dBm (EU) 5.2 GHz: < 11.96 dBm (USA & Canada), < 15.09 dBm (EU) 5.8 GHz: < 6.00 dBm (USA & Canada), < 11.16 dBm (EU) |
Software
| Supplied Software | Luban (third-party software supported) |
| Supported OS of Luban | Windows, macOS |
| Supported File Formats | STL, OBJ, 3MF |
| Output File Formats | G code |
[1] Hardened steel nozzle should be used when printing with PA, PA-GF, and PA-CF.
[2] The data may vary depending on the testing conditions and product iteration and is for reference only.
[3] The data is estimated based on the usage of printing at 100 mm/s for 24 hours per day. It may vary depending on the testing conditions and product iteration, and is for reference only.