Single Extrusion 3D Printing Module

Dual Extrusion 3D Printing Module

Compatible Machine Models

Snapmaker A150/A250/A350, F250/F350, A 250T/A350T

Snapmaker A150/A250/A350, F250/F350, A 250T/A350T

Dimensions

(W x D x H)

90 mm × 51 mm × 91.5 mm

108 mm × 70 mm × 133 mm

Extrusion Flow

9 mm³/s

20 mm³/s

Pieces of Fans

Calibration Processes

Mesh Bed Leveling and Z Offset Calibration

Mesh Bed Leveling, Z Offset Calibration, and XY Offset Calibration

Extruder Switching Method

N/A

Switching by Motor Lifts

Hot End

Non-quick-swap Design

Quick-swap Design

Supported Nozzle Diameter

Standard: 0.4 mm Brass Nozzle

Standard: 0.4 mm Brass Nozzle

Optional: 0.2 mm Brass Nozzle,

0.6 mm Brass Nozzle,

0.8 mm Brass Nozzle,

0.4 mm Hardened Nozzle

Maximum Heating Temperature

275℃

300°C

Supported Printing Materials

PLA, ABS, PETG, TPU

PLA, Breakaway PLA, ABS, ASA, PETG, PVA, TPU95-HF, TPU95, TPU90, TPU-foam, HIPS, CoPA, PA6-CF, PA6-GF, PA12-CF

Work Area

A150:

160 mm × 160 mm × 145 mm   

A250/F250/A250T: 

230 mm × 250 mm × 235 mm  

A350/F350/A350T:

320 mm × 350 mm × 330 mm

A150:

Dual Nozzle or Right Nozzle Only: 135 mm x 140 mm x 110mm;

Left Nozzle Only: 145 mm × 145 mm × 110 mm;

A250/F250/A250T: 

220 mm × 235 mm × 205 mm

A350/F350/A350T:

Dual Nozzle: 310 mm × 325 mm × 290 mm;

Left  Nozzle or Right Nozzle Only: 310 mm × 330 mm × 290 mm