Please refer to the following comparison table.
Note: When the Dual-Extruder Module for Snapmaker 2.0 is installed on Artisan, the work area of the Y-axis of the Dual-Extruder Module for Snapmaker 2.0 is reduced by 30mm. Below is the Work Area of the Snapmaker 2.0 Dual-Extruder Module installed on Artisan.
Work Area(W × D × H)
Dual Nozzle: 350mm × 370mm × 400mm
Left Nozzle: 375mm × 370mm × 400mm
Right Nozzle: 400mm × 370mm × 400mm