To get the booting log of the machine, follow the steps below:
1. Turn on the machine.
2. Connect the machine with Snapmaker Luban via the USB cable.
If you haven't installed Snapmaker Luban and the CH340 driver, download and install them from this website.
3. On the Console panel of Snapmaker Luban, input M1999, and press Enter. Or, click the Run button of the M1999 Booting Log macro on the Marco panel. The message that shows up in the Console panel is the booting log of your machine.
You can refer to this video.
Here is an example of what a booting log looks like.
M1999
others < will reboot machine
ok
echo:PowerUp
others < echo:Compiled: Sep 13 2021
echo: Last Updated: 2021-09-13 | Author: Snapmaker Team
echo:Compiled: Sep 13 2021
echo: Free Memory: 24543 PlannerBufferBytes: 1792
echo:V71 stored settings retrieved (1064 bytes; crc 60716)
echo: G21 ; (mm)
echo:Filament settings: Disabled
echo: M200 D3.00
echo: M200 D0
echo:Steps per unit:
echo: M92 X400.00 Y400.00 Z400.00 E212.21
echo:Maximum feedrates (units/s):
echo: M203 X120.00 Y120.00 Z40.00 E25.00
echo:Maximum Acceleration (units/s2):
echo: M201 X3000.00 Y3000.00 Z100.00 E10000.00
echo:Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>
echo: M204 P1000.00 R1000.00 T1000.00
echo:Advanced: B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>
echo: M205 B20000.00 S0.00 T0.00 J0.02
echo:Home offset:
echo: M206 X-19.00 Y-10.00 Z0.00
echo:Auto Bed Leveling:
echo: M420 S0 Z0.00
echo: G29 W I0 J0 Z6.53500
echo: G29 W I1 J0 Z6.57500
echo: G29 W I2 J0 Z6.39750
echo: G29 W I3 J0 Z6.08375
echo: G29 W I0 J1 Z6.74875
echo: G29 W I1 J1 Z6.78500
echo: G29 W I2 J1 Z6.68250
echo: G29 W I3 J1 Z6.49000
echo: G29 W I0 J2 Z6.64750
echo: G29 W I1 J2 Z6.72750
echo: G29 W I2 J2 Z6.67250
echo: G29 W I3 J2 Z6.49750
echo: G29 W I0 J3 Z6.32250
echo: G29 W I1 J3 Z6.46500
echo: G29 W I2 J3 Z6.44000
echo: G29 W I3 J3 Z6.25625
echo:PID settings:
echo: M301 P13.00 I0.10 D17.00
echo:Z-Probe Offset (mm):
echo: M851 Z1.00
echo:Linear Advance:
echo: M900 K0.04
others < Screen exists!
others < Message ID region:
others < emergent: 0 - 2
others < high : 3 - 17
others < medium : 18 - 45
others < low : 46 - 127
others < Created marlin task!
others < Created HMI task!
others < Created heartbeat task!
others < Created can receiver task!
others < Created can event task!
others < Scanning modules ...
others < New Module: 0x203AB70C
others < Module 0x003AB70C: v1.10.3
others < Got axis Y, endstop: 0
others < length: 356 mm, lead: 8 mm
others < Function [ 0] <-> Message [ 3]
others < New Module: 0x203AB77A
others < Module 0x003AB77A: v1.10.3
others < Got axis Z, endstop: 0
others < length: 356 mm, lead: 8 mm
others < Function [ 0] <-> Message [ 4]
others < New Module: 0x00801B56
others < Module 0x00801B56: v1.10.3
others < Got EmergencyStop Module!
others < Function [ 20] <-> Message [ 0]
others < New Module: 0x20011696
others < Module 0x00011696: v1.10.3
others < Got toolhead 3DP!
others < Function [ 8] <-> Message [ 18]
others < Function [ 9] <-> Message [ 19]
others < Function [ 6] <-> Message [ 20]
others < Function [ 7] <-> Message [ 21]
others < Function [ 1] <-> Message [ 5]
others < Function [ 10] <-> Message [ 22]
others < Function [ 2] <-> Message [ 6]
others < Function [ 16] <-> Message [ 23]
others < probe: 0x1, filament: 0x0
others < New Module: 0x005097A8
others < Module 0x005097A8: v1.10.3
others < Got Enclosure!
others < Function [ 15] <-> Message [ 7]
others < Function [ 18] <-> Message [ 24]
others < Function [ 19] <-> Message [ 25]
others < New Module: 0x203AB83E
others < Module 0x003AB83E: v1.10.3
others < Got axis X, endstop: 0
others < length: 356 mm, lead: 8 mm
others < Function [ 0] <-> Message [ 8]
others < New Module: 0x203AB828
others < Module 0x003AB828: v1.10.3
others < Got axis Y, endstop: 0
others < length: 356 mm, lead: 8 mm
others < Function [ 0] <-> Message [ 9]
others < New Module: 0x203ABC10
others < Module 0x003ABC10: v1.10.3
others < Got axis Z, endstop: 0
others < length: 356 mm, lead: 8 mm
others < Function [ 0] <-> Message [ 10]
others < axis index:0 pitch:400.00
others < axis index:1 pitch:400.00
others < axis index:2 pitch:400.00
others < Model: A350
others < grid manual
others < disable door checking!
others < PL: first free block index: 14
others < PL: first non-free block index: 14
others < PL: no any data
others < PL: No data!
others < Finish init