You can use the USB cable or the USB flash drive to transfer the G-code to machine and start carving.
Option 1: Online Carving
If you prefer online carving, you just need to click the Run button 
in the software. In this way, the computer must be connected to the machine throughout the process.
Note 1: You can adjust Work Speed during the carving progress.
Note 2: If you need to stop carving during the working process, click 
and 
.
Option 2: Offline Carving
1. If you prefer offline carving, please disconnect to the Serial Port and unplug the USB cable.
2. Enter CNC G-code Generator 
, then click Export G-code to file. The extension of the exported G-code file is ".cnc". Save it to the USB flash drive.
3. Insert the USB flash drive into the controller of the machine.
4. Tap Files on the touchscreen. Select the G-code file and tap Start to start carving.
