3.1 Material Overview
Snapmaker 2.0 CNC carvers support material including wood, MDF, acrylic sheet, carbon fiber sheet, POM, PCB, more being tested.
The data sheets provided in this manual are intended for reference and comparison purposes only. Actual performance varies with carving conditions. Users are responsible for judging the fitness for application in specific conditions. The data is subject to change without notice.
3.2 Wood
Recommended Tool: Flat End Mill (Cutting Diameter: 1.5 mm)
To get more information on the hardness of a specific type of wood, see Wood Database at wood-database.com/wood-filter.
3.3 MDF
Recommended Tool: Flat End Mill (Cutting Diameter: 1.5 mm)
3.4 Acrylic
Recommended Tool: Flat End Mill (Cutting Diameter: 1.5 mm, Single Cut)
Machining acrylic sheets may emit pungent odors, so wear protective masks before operation.
3.5 Carbon Fiber
Recommended Tool: Flat End Mill (Cutting Diameter: 1.5 mm)
3.6 POM
Recommended Tool: Flat End Mill (Cutting Diameter: 1.5 mm, Single Cut)
3.7 PCB
Recommended Tool: V-bit (Cutting Diameter: 0.3 mm, Included Angle: 30°)