You can use the USB cable or the USB flash drive to transfer the G-code to machine and start engraving.
Option 1: Online Engraving
If you prefer online engraving, you just need to click the Run button in the software. In this way, the computer must be connected to the machine throughout the process.
Note: You can adjust Work Speed and Laser Power during the engraving progress.
Option 2: Offline Engraving
1. If you prefer offline engraving, please disconnect to the Serial Port and unplug the USB cable.
2. Enter Laser G-code Generator , then click Export G-code to file. The extension of the exported G-code file is ".nc" by default. Save it to the USB flash drive.
3. Insert the USB flash drive into the controller of the machine.
4. Tap Files on the touchscreen. Select the G-code file and tap Start to start engraving.