Please refer to the following comparison table.
10W High Power Laser Module |
1.6W Laser Module |
|
Laser Output Power[1] |
10 W |
1.6 W |
Laser Electric Power |
36 W |
11 W |
Laser Type |
450 - 460 nm Semi-conductor |
450 - 460 nm Semi-conductor |
Maximum Engraving Speed[2] |
6000 mm/min |
1000 mm/min |
Maximum Cutting Speed[3] |
600 mm/min |
140 mm/min |
Work Area |
320 mm × 350 mm (A350/A350T/F350) |
320 mm × 350 mm (A350/A350T/F350) |
Frame Material |
Aluminum Alloy |
Aluminum Alloy |
Laser Spot Dimensions |
0.05 mm × 0.2 mm |
0.2 mm × 0.3 mm |
Supported Engraving Materials |
Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Painted Metal, Copper Clad Laminate, Tinplate, Stainless Steel, Anodized Aluminum, Dark Glass, Slate, Brick, Ceramic, Jade, Marble, Shale, Leather, Fabric, Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded) |
Basswood, Pinewood, Plywood, Bamboo, Leather, Fabric, Paper, Dark Acrylic (Blue excluded) |
Supported Cutting Materials |
Basswood, Pinewood, Plywood, Beech, Walnut, Bamboo, MDF, Leather, Fabric, Canvas, Corrugated Paper, Cardboard, Plastic, Dark Acrylic (Blue excluded) |
Basswood, Pinewood, Plywood, Paper, Dark Acrylic (Blue excluded) |
Maximum Cutting Depth |
8 mm Basswood[4] |
1.5 mm Basswood |
Supported Design File |
STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR |
STL, SVG, JPEG, PNG, JPG, BMP, DXF, SNAPLZR |
Supported Processing File |
NC |
NC |
Camera Capture |
One Picture |
A Combination of Nine Pictures |
Focus Method |
Auto Measuring via Triangulation Material Touching Measuring |
Manual Material Measuring Manual Adjustment of Laser Spot |
Overheat Protection |
YES |
NO |
Orientation Detection |
YES |
NO |
[1] The actual Laser Output Power of the 10W High Power Laser Module is 9.5W on average, and that of the 1.6W Laser Module on average is 1.5W.
[2] The data is obtained based on the basswood engraving on line movement mode.
[3] The data is obtained based on the 1.5mm basswood performing one cutting pass with the 10W Laser Module, but two cutting passes with the 1.6W Laser Module.
[4] Note that you need to perform two cutting passes in order to cut through an 8 mm basswood. The maximum cutting depth per pass for basswood is 5 mm.