Our Support Center is under upgrade and migration from Feb 14 to Feb 18. If you can‘t find articles on the page, enter keywords in the search bar. Sincere apologies for the inconvenience.
What should I do if the Snapmaker Original 3D printing module move outside the working area?
Zero
Please check if you choose the wrong machine to use in Luban.
Please check the settings of your G-code. The buildvolume for 3D printing is 125*125*125 mm. Please make sure the size of the model you are printing is not larger than the build volume. Please note that if the model you design is larger than the build area, you will not be allowed to generate the G-code by Luban. Once you can generate the G-code, the model is within the build area.
Please check if you have assembled this machine in the wrong way. For example, please check if the X-axis is set in an opposed directionor you may have assembled the module with wrong screw holes.
Please check whether the working area is exceeded due to the wrong adhesive method selected.
