3D Printing
You can find FAQ about the 3D printing module here.
- How to Replace the Hot End
- What should I do if the filament is broken in the 3D Printing Module?
- What should I do when the printing module is installed on the machine, the touchscreen shows Laser or CNC module?
- Repair tutorial for Snapmaker Original
- What should I do if the touchscreen shows “Min Temp Err”(Nozzle)?
- What should I do if the Z-axis does not move downwards (I am not using an enclosure)?
- What should I do if the filament does not move in smoothly?
- What should I do if the heated bed heats up uncontrollably?
- What should I do if the 3D printing module cannot work with an enclosure?
- What should I do if the nozzle heats up constantly or the laser and the CNC module are at full power uncontrollably?
- What should I do if the layers of a 3D printing models shift to the side?
- What should I do if the modules move out of the work area?
- What should I do if the toolhead cannot move down?
- What should I do if there is a crack in the print?
- What should I do if the 3D printing module suddenly stops working and the target temp on the screen falls to zero?
- What should I do if the 3D printing module move outside the working area?
- What should I do if I want to change the nozzle?
- What Should I do if the temperature of the heated bed/nozzle is NA on the touch screen?
- What should I do if the temperature on the screen suddenly falls to zero?
- Can it 3D print nylon filament?
- What should I do when the nozzle is jammed?
- How to replace the heating tube and thermistor?
- What should I do if the heated bed cannot be heated up?
- How to remove a blob of filament on the hot end?
- What should I do if the first layer does not stick to the heated bed?
- Do you have a recommended setting of 3D printing for other slicing softwares?