Skip to main content
Submit a request
What should I do if the Power Supply Unit (PSU) does not work?
What should I do if the gcode file cannot be transferred to the machine via Wi-Fi?
How to upgrade the controller separately?
Is there another method to upgrade the machine's firmware apart from via USB flash way?
What can I do if the machine cannot detect the USB-drive?
What should I do if the machine cannot detect all the tool-heads?
How can I fix the magnets of the enclosure if they come off?
What are the parameter settings of printing PETG?
Magnets on the Hall Effect switch
Snapmaker 2.0 Enclosure Sound-reduction Test
How to upgrade the firmware of 2.0?
Why can't I Find my Order via 'View your order' in my Confirmation Email?
Why Cannot I Log into the Official Store with my Account?
How Do I Find the Correct Store?
How can I become a reseller or distributor?
How noisy is the Snapmaker 2.0?
How to reduce the noise?
How often do the linear modules need maintenance?
Are the modules interchangeable between Snapmaker 1 and 2?