If the linear modules stop while the machine is working for no reasons, please do as follows to check the silicone pad inside the modules as the instruction below.
The linear module motor circuit board has a heat dissipation silicone sheet. If the silicone pad is missing, the motor will shut down due to overheating.
Please dismantle the wire end of the linear module and check if the silicone pad is there. Or it may be inside.
Please be careful that do not pull out the end too much in the case that the wire of the limit switch will be affected.
If there is no silicone pad, we need to send you a new linear module for the replacement.
Please forward this information to email@example.com
If any of the pictures in this article are missing, please refer to this link for the PDF file: