After powering on the machine, the warning of "the machine is not connected, would you like to reconnect" continuously appears in the touchscreen.
- Please power off the machine. You need to check if the breathing LED flashes at the moment you re-power on the machine. There is a breathing LED behind the main controller, and here I offer a video for you to refer to: https://drive.google.com/open?id=1iArDwEYZQCqlhx7vrbDiE2twZoMPLKKq
If the LED does not flash at the moment you power on the machine, the main controller may be defective. Please contact email@example.com for further help.
- Please connect the machine with the PC via the provided USB cable, and try to control the machine via Snapmaker Luban.
- Please record the result of the breathing light and the control pad, and send the result to firstname.lastname@example.org